Havixbeck | Stift Tilbeck
The tree grate APOLLUS® from HUMBERG is the invisible protection for the root system. It can be filled with any floor covering. Whether pebbles, paving slabs, paving stones, asphalt or water-bound path covers, everything is possible. Like a chameleon, it is hardly noticeable in the design of the site, because the size of the opening for the trunk can also be chosen freely. Because it is made of steel, the grate is 99% recyclable. The grate is designed for a load capacity of 1.5 t / car or 5 ton / truck.
Fillable tree gratings are always useful when the greatest possible use of the area close to the tree is to be given and a uniform image is to be created in the entire environment.
The fillable tree grate consists of a galvanized steel frame that is screwed directly to the concrete foundation. On the inside there is a plaster stop edge at the same height as the frame. In combination with the HUNO® TreeCare System, the tree receives everything it needs for a long life.
|Inner HUNO® plaster stop edge||Made of sheet steel S235JR (EN DIN 10 027 -1), square or round, 15 cm high for fastening to the inner segments, horizontally adjustable up to 5.0 cm for alignment in the joint pattern of the slab coverings|
|Fine mesh cover||With an aluminum-zinc alloy for better pressure distribution|
|Inner segment||Welded profile tube construction, multi-part, hot-dip galvanized according to DIN EN ISO 1461 with a lead-free zinc melt (zinc content of 98%) for screwing, self-supporting, for loose insertion in the outer frame for 5.0 t wheel load|
|Inner segment as a perforated sheet pan||Inner segment, welded profile tube construction, multi-part as a perforated tray for holding the fillable material and avoidance of standing water, hot-dip galvanized according to DIN EN ISO 1461 with a lead-free zinc melt (zinc content of 98%), for screwing, self-supporting for loose insertion in the outer frame, for 5.0 t wheel load|
|Outer frame||Outer frame, screwed in several parts, made of sheet steel S235JR (EN DIN 10 027-1), hot-dip galvanized according to DIN EN ISO 1461 with a lead-free zinc melt (zinc content of 98%) for screwing onto the concrete foundation|
|HUNO® watering set 2||Height-adjustable HUNO® water-air cap made of pressure-resistant cast aluminum with a stainless steel cover, 4 m drain pipe DN 80, without filter and T-connector|
|Concrete foundation||4-part, 25 cm high, 16 cm wide incl. reinforcement with Q 188 A stirrup cage up to 5 t wheel load, material: C 35 / 45 with high water penetration resistance, with cast-in threaded sleeves for transport and assembly|
|Connectors||Screws, washers, dowels etc.|
LENGTH X WIDTH IN CM
DIAMETER IN CM
TRUNK NECK OPENING IN CM
ROUND | SQUARE IN CM
|150 x 150||Ø 150||50 | 70 or 80|
|180 x 180||Ø 180||50 | 70 or 80|
|200 x 200||Ø 200||50 | 70 or 80|
|250 x 250||Ø 250||50 | 70 or 80|
|300 x 300||Ø 300||50 | 70 or 80|
|OR PROJECT-SPECIFIC MANUFACTURING|