- de
- en
Nottuln | Hanhoff
Many trees suffer from the heat and drought and have to endure long periods without precipitation. Irregular supply of water, however, leads to stress for urban trees. For example, a birch tree evaporates about 60 liters per day, but if there is insufficient supply, it sheds the leaves, so that no evaporation can take place, and then, there is no cooling effect on the environment either.
The HUMBERG irrigation system offers a solution by successive tree irrigation. The support frame serves as a water reservoir and provides the tree with sufficient liquid through an optional, adjustable drip irrigation system.
The system can be used for both new plantings and existing trees.
A SIPA system combines protection and irrigation of planting pits. It reduces the number of irrigation operations by municipalities, by means of storage capacities.
The tried-and-tested irrigation system, which acts as the supporting frame for our surface gratings or underfloor tree gratings, combines irrigation, protection against compaction and ventilation of the planting pit in one system. Depending on the system size, the support frame can be filled with 130-360 l. The water is supplied to the tree in reduced quantities by throttling. This type of irrigation prevents the substrate from being washed away and ensures that the tree does not get all the water at once. The adjustable water outlet also sets out drinking water sasvings.
Surface grating
HUNO® Geotextile
Perforated sheet
Water reservoir
Filler neck
Fastener
HUNO® Geotextile
Inner HUNO® plaster stop edge
Perforated sheet
Water reservoir
Filler neck
Fastener
| CONSISTING OF | |
| Surface rust | Depending on the chosen version |
| HUNO® Geotextile | With pressure-resistant grid core 670 g / m2, water and air permeable |
| Perforated plate | Sheet steel S235JR (EN DIN 10 027-1) |
| Water reservoir | With outlet opening and integrated, welded profile tube construction, multi-part, hot-dip galvanized according to DIN EN ISO 1461 with a lead-free zinc melt (zinc content of 98%) |
| Filler necks | With swivelling stainless steel lid |
| Inner HUNO® plaster stop edge | Made of sheet steel S235JR (EN DIN 10 027 -1), square or round, 15 cm high for attachment to the profile tube construction, horizontally adjustable up to 5.0 cm for alignment in the joint pattern of the slab coverings |
| Fastener | Screws, washers, dowels etc. |
L x W x H IN CM | STEM NECK OPENING ROUND | SQUARE IN CM | CAPACITY IN L |
150 x 100 x 10 |
according to customer requirements | 100 |
200 x 100 x 10 | 150 | |
250 x 125 x 10 | 200 | |
Filling time: about 4-5 minutes Water release: about 6-8 hours |
OR PROJECT-SPECIFIC MANUFACTURING |
